Back to all articles

Neither a lever handle nor a round knob is better for every household. Levers open with a downward push, so they suit full hands and weak grips, but a toddler who can reach one or a pet that jumps up can open it too. Knobs need a deliberate twist. Handle shape does not secure an entry door. The deadbolt does, so this is a choice about daily use.

Handle shape and locking are separate jobs

A door handle, lever or knob, does one mechanical job. It pulls back the latch, the slanted spring-loaded tongue that clicks into the frame and holds the door shut. On an entry door, the securing is usually done by the deadbolt, a solid bolt thrown by a key or thumb turn, which sits on its own above the handle.

Both shapes come in the same lock functions. A passage set has no lock. A privacy set has a push button for bedrooms and baths. A keyed entry set has a cylinder in the outside handle. Choose the function for the door's job and the shape for the people using it.

Lever handles in daily use

A lever handle opens with downward pressure. You can push it with an elbow or the back of your hand, which helps when you come in with a grocery bag in each arm or a laundry basket on your hip.

Levers also suit anyone with reduced hand strength or stiff, sore joints. There is no grip and no twist, only weight pressed down. If someone at home struggles with jar lids, a lever is usually the easier handle for them.

The trade-off is that a lever that is easy for you is easy for small hands and paws. A toddler who can reach a lever can hang on it and open the door, and some dogs and cats learn to jump up and push one down. On a basement stairway or a room where cleaning products live, that ease works against you.

A lever also sticks out further from the door than a knob. It can snag a sleeve or bag strap, and it can mark the wall if the door swings wide without a stop.

Where a round knob earns its place

A round knob needs a grip and a twist at once. On some doors that small effort is the point. Young children often can't hold a smooth knob firmly enough to turn it, and a dog or cat has no way to twist one, so a knob keeps a closet or storage room closed without any lock.

Knobs are compact, too. Where a door opens close to a wall or beside a dresser, a knob takes less room and is less likely to catch on anything.

The twist is also where knobs fall short. Wet or soapy hands slip on a knob, and arthritic hands can find the turn painful. Nobody turns a knob with an elbow.

How do you choose for each door?

Go door by door, thinking about who uses each one and what it's for. Most homes end up with both shapes.

Before you buy, look at what the old hardware sits in. Most modern doors have a round hole through the face and a smaller one in the edge for the latch, and a lever set made for that layout often goes into the same holes. Some older doors use a mortise lock, a rectangular box set into the door edge where handle and lock work as one unit, and that is not a simple swap. Check, too, whether the deadbolt is separate above the handle.

In a rental or shared building, consistency usually matters more than one person's preference. You rarely know who the next tenant will be, so the easier lever is a sensible default for entry doors. Keeping the same style and function across units also makes turnover simpler, because a lock change or rekey at move-out goes the same way in each unit.

Brooklyn Locksmith & Doors does residential and commercial lock work in Brooklyn. If your new handles come with a lock change or rekey, or you're adding a smart lock, call (347) 357-0985.

Frequently asked questions

Can I mix levers and knobs in the same home?

Mixing levers and knobs in one home is common. Each door has its own latch, and the shape on one door has no effect on another. What's worth matching is the lock function each door needs and, on outside doors, the keys. If a keyed front handle and its deadbolt take the same type of key blank, a rekey can set both to one key.

Will a lever handle fit the hole my old knob came from?

A lever set built for standard bored doors often fits the hole an old knob came out of. Two details decide it: the backset, meaning the distance from the door edge to the center of the hole, and the size of the holes themselves. If either doesn't match the new set, or the door has an older mortise lock, the swap needs more than a new handle.

Do I need to change the deadbolt if I change the handle?

Changing a knob to a lever usually leaves the deadbolt alone, because the deadbolt is normally a separate lock mounted above the handle. The exception is a combined unit, such as many mortise locks, where bolt and handle are built together and change as one piece. With a separate deadbolt, you can replace the handle and keep the bolt you already have.

Do smart locks come in both lever and knob styles?

Smart locks are made in both lever and knob-style forms. Many smart locks are deadbolts that sit above whatever handle you pick, so they pair with a lever or a knob. Others replace the handle itself, which means the latch hardware changes too. Brooklyn Locksmith & Doors installs smart locks as well as handling lock changes and rekeys.

Need a locksmith in Brooklyn? We come to you -- 24/7.

(347) 357-0985 - Call Now