The latch holds a closed door in its frame automatically. The deadbolt locks the door in place, but only after you throw it with a key or thumbturn. The latch is a spring-loaded, angled bolt that slides into the frame by itself as the door shuts. The deadbolt is a square-ended bolt with no spring, so it stays put until you move it, and pushing on the door cannot drive it back.
What the latch does as the door swings shut
The latch bolt is the one beside the knob or lever, with one slanted face and one flat face. As the door swings toward the frame, the slanted face meets the strike plate, which is the metal plate screwed to the frame with an opening cut into it. That contact pushes the latch back into the door against its spring. When the door lines up with the opening, the spring pushes the latch out into it. That is the click you hear, and nobody had to turn anything.
The latch's job is to keep a closed door from drifting open with a draft or a casual push. To open the door, you turn the knob or press the lever, and that draws the latch back out of the strike. Some handles can be set so the outside one won't turn, but the latch bolt itself is still the same spring-loaded part doing the same job.
What the deadbolt does, and why it is a separate bolt
The deadbolt usually sits above the handle. It typically has a keyhole on the outside and a thumbturn, the small knob you twist by hand, on the inside. The deadbolt's bolt is square-ended. It has no spring and no slanted face, so it stays exactly where you last left it.
Without a slanted face for the frame to press against, pushing on the door does nothing to drive the deadbolt back. Only the key or thumbturn moves it out or in. The word "dead" refers to that: the bolt does not spring back.
The missing spring is also why you have to turn the key or thumbturn after closing the door. A deadbolt cannot extend on its own as the door closes, and if it were already out while the door swung, it would hit the frame instead of entering it. So the deadbolt does its job only when someone deliberately throws it. Left retracted, it is just sitting inside the door.
Is a door that clicks shut a locked door?
A door that clicks shut is closed, which is not the same as bolted. With only the latch engaged and the deadbolt retracted, anyone who can operate the handle can open the door. With the deadbolt thrown, the door stays in place until that bolt is withdrawn by key or thumbturn. The click tells you the latch caught. Turning the key or thumbturn is what sends the deadbolt into the frame.
A second mix-up makes problems hard to describe: calling the whole assembly "the lock." Saying "the lock isn't working" could mean the latch won't catch, the deadbolt won't extend, or a key won't turn. Those are different parts. Naming which bolt is misbehaving narrows the problem before anyone looks at the door.
What you can notice without taking anything apart
- Close the door gently without touching the key or thumbturn. If it stays shut and you heard a click, the latch caught the strike. If it drifts open, the latch is not reaching or not catching the opening.
- With the door open, turn the thumbturn and watch the edge. The square-ended bolt that comes out only then is the deadbolt. The slanted bolt that moves when you turn the handle is the latch.
- With the door closed, turn the thumbturn. If it turns freely, the deadbolt is finding its opening in the frame. If it stiffens or stops unless you push or pull the door, the deadbolt and its opening are not lining up.
Those observations give you plain words for a locksmith: "the door won't stay latched" points to the latch and strike, while "the deadbolt won't go all the way out when the door is closed" points to the deadbolt and its opening. The same two roles exist on shared building doors and storefronts, even when the hardware looks different. If either part on your door isn't doing its job, you can call Brooklyn Locksmith & Doors at (347) 357-0985.
Frequently asked questions
Can a door have a latch but no deadbolt?
Yes. Many interior doors, such as bedroom and closet doors, have only a spring latch, sometimes with a privacy button in the handle. Some exterior doors also rely on a latch with a handle that can be locked. On a latch-only door, the spring latch is the only bolt holding the door in the frame, and there is no separate bolt that you throw by hand.
Why does my door not stay closed even though the deadbolt works?
A door can fail to stay closed while the deadbolt works because the latch and deadbolt are separate mechanisms. The latch has to spring into the strike opening by itself as the door closes. If the door or strike has shifted so they no longer line up, the latch can stop short of the opening. The deadbolt, thrown by hand once the door is held shut, can still go in.
Is the part that sticks out of the door edge when I turn the key the latch or the deadbolt?
A bolt that comes out of the door edge only when you turn the key or thumbturn, and has a flat, square end, is the deadbolt. If turning a key in the knob instead pulls a slanted bolt back into the door, that is the latch being retracted, not a separate bolt extending. The direction of movement tells you which one you have: out means deadbolt, in means latch.
Does rekeying or changing a lock affect the latch and the deadbolt differently?
Rekeying changes which key operates a lock cylinder, the part with the keyhole, so it affects whichever pieces have one: the deadbolt, and the handle if it locks with a key. Rekeying does not change how the spring latch catches the strike. A lock change replaces the hardware itself. Brooklyn Locksmith & Doors offers both lock changes and rekeying.
Need a locksmith in Brooklyn? We come to you -- 24/7.
(347) 357-0985 - Call Now