A locksmith visit goes smoothly when three things are ready before anyone touches the lock. The first is a plain description of which door needs what. The second is a door that can be reached and worked on, with someone present who can approve the job. The third is a short set of questions about the work plan, settled before work begins.
Name the door and the result you want
Start with which door this is and what it does. A house's front door, a shop's street door, a side gate, and an office door inside a larger floor get used very differently, and that changes what a locksmith looks at. Note who goes through the door and roughly how often.
Then put the goal into one or two plain sentences. "The deadbolt on the back door is hard to turn and I want it working again" does the job. So does "I want the front door rekeyed so the old keys stop working, and a smart lock on the side door." Rekeying means changing the small pins inside the lock cylinder so a new key works and the old ones don't.
A sentence like that tells the locksmith whether you need a repair, a lock change, a rekey, or a new feature. If you aren't sure which fits, describe the result you want and leave the choice open.
The person who controls the door is the one who can say yes to work on it. That could be the owner, a property manager, a business owner, or a tenant who has checked with the landlord. If that person isn't you, settle it before the visit, not while the locksmith waits.
Getting the door ready
Look and take notes first
Work the door a few times, both open and closed. Watch whether the door drags on the floor or rubs the frame. Check whether the latch, the angled bolt that snaps into the frame, catches without a push. Try the deadbolt with the door open, then with it shut. A deadbolt that turns freely when the door is open but sticks when the door is closed points to how the door sits in the frame, not just the lock. Write one line for each thing you notice.
Photograph the lock from inside and outside. Add a shot of the door edge where the bolts come out, and one of the strike plate, the metal plate on the frame that the bolts slide into. On a storefront, include the whole door and the closer, the arm at the top that pulls the door shut.
Make room to work
Clear the swing path on both sides. Move mats, boxes, and bikes, and leave space to kneel at the lock. Turn on enough light to see the hardware. Put pets in another room before the door starts opening and closing.
Sort out access
Someone with authority over the door should be there, or at least reachable by phone. If the locksmith has to get through a street door or lobby first, arrange how they will be let in.
Don't force, take apart, or try workarounds on the lock before the visit. A half-dismantled lock or a key snapped off from forcing usually turns a simple job into a bigger one. It also hides what was wrong in the first place.
What should you ask before work starts?
Once the locksmith has looked at the door, settle what is about to happen before any tools come out. These questions cover most of it:
- What do you recommend for this door, and why that over the other option?
- Is this a repair to the hardware already there, or does part of it get replaced?
- What does the work plan include from start to finish, and is anything left for another visit?
- What will be on the door when you're done, and what happens to the old hardware, holes, or plates?
- How many keys do I get back, and will any old keys still work?
- For a smart lock, who holds the codes or app access once it is set up?
Agree on what is being done before work begins, either in writing or by a clear spoken summary you both accept. If the plan changes once the door is opened up, ask for the change to be explained before it goes ahead.
What to have in hand at the door
- Every existing key for that lock, including spares you can track down
- Key cards, fobs, or remotes tied to the door
- Your photos and the notes you wrote
- The name and phone number of the person authorizing the work, if that isn't you
- Something that ties you to the property, such as ID showing the address, a lease, or a note from the building manager
On a business door, collect keys from staff ahead of time so you know how many are out there.
For a planned lock job or a 24/7 emergency lockout, call Brooklyn Locksmith & Doors at (347) 357-0985 with your one-line description in front of you.
Frequently asked questions
Do I need to be home when the locksmith works on my door?
Someone who can approve the work should be at the door when the locksmith starts and again when the work is finished. At the start, that person confirms what is being done. At the end, they check that the door locks and unlocks properly and collect the keys. If you can't be there, choose someone with authority over the door and give the locksmith that person's phone number.
What if I'm a tenant and not sure I can approve a lock change?
A tenant who isn't sure about approving a lock change should ask the landlord or property manager before booking, not at the door. The landlord or manager may want to arrange the work themselves, approve it, or keep a copy of the new key. Settling that first keeps the visit from stalling halfway through.
Should I keep my old keys after a rekey or lock change?
After a rekey or lock change, the old keys no longer open that lock. Label them and set them aside until you have tested each new key in the door, locking and unlocking from both sides. Once the new keys work, the old ones can go, unless they still fit another lock you haven't changed.
How should I prepare if the visit is an emergency lockout rather than a planned job?
An emergency lockout leaves little time, so focus on what you can do from outside. Note exactly which door and which lock is keeping you out. Stay somewhere safe and keep your phone charged. Have ID or mail showing the address ready if you can reach it. Tell the locksmith right away if a child, a pet, or something on the stove is inside.
Need a locksmith in Brooklyn? We come to you -- 24/7.
(347) 357-0985 - Call Now